Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Hialeah?
Fireplace services in Hialeah typically run $190 to $320 for a standard chimney sweep and inspection, $1,800 to $4,200 for a HeatShield flue resurfacing or a DuraFlex liner installation, and $150 to $240 for a dryer vent cleaning. A fireplace tune-up that includes cleaning the firebox, checking the damper, and inspecting the flue commonly lands between $220 and $400. These are typical 2026 estimates for this market; the written estimate you receive before any work begins sets the final price.
We handle three things only: chimney sweeping, dryer vent cleaning, and chimney repair. That focus is why we can give you a firm number instead of a shrug. Call (855) 918-2061 and we’ll book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A standard sweep and inspection in Hialeah usually costs $190 to $320.
- HeatShield flue resurfacing, which rehabilitates an existing flue instead of replacing it, typically runs $1,600 to $2,900.
- Full liner replacement with a DuraFlex system generally falls between $2,600 and $4,200 depending on flue height and shape.
- Dryer vent cleaning is the cheapest safety service on the list at $150 to $240.
- The estimate is free, and the price is set per job by the written estimate.
Fireplace Services Cost Breakdown (2026)
Here’s how the numbers break down by service. Ranges are typical for Hialeah homes, and the final figure depends on what we actually find when we look at your flue and firebox.
| Service | Typical Price Range | What’s Included |
|---|---|---|
| Chimney sweep (standard) | $190 – $320 | Rod-and-brush sweep of the flue, firebox cleaning, visual inspection |
| Sweep + video inspection | $260 – $420 | Full sweep plus camera inspection of the flue interior |
| Fireplace tune-up | $220 – $400 | Firebox cleaning, damper check, flue inspection, gasket and seal check |
| Dryer vent cleaning | $150 – $240 | Full-length vent clearing, termination and vent-hood check |
| HeatShield flue resurfacing | $1,600 – $2,900 | Resurfacing of a damaged or pitted flue to extend its life |
| DuraFlex liner installation | $2,600 – $4,200 | Flexible stainless liner sized and fitted to the flue |
| Damper or cap replacement | $240 – $650 | New damper assembly or chimney cap installed |
| Crown or masonry repair | $400 – $1,800 | Repair of a cracked crown or damaged masonry at the top |
What pushes a price up? Two things mostly. Flue condition and flue shape. An older home with an irregularly shaped or offset flue costs more to line because a rigid system won’t fit and we have to size a flexible DuraFlex liner around bends and transitions. A flue that’s badly damaged may need HeatShield resurfacing before a liner even makes sense. Access matters too: a chimney on a low, easy-to-reach roof is a simpler job than one with a steep pitch or tight clearance.
What keeps the price down? Catching problems while they’re small. A sweep and inspection that finds a minor crack is far cheaper than a liner replacement discovered after years of acidic creosote sitting on the flue wall. That’s the honest economics of fireplace work in Hialeah. The cheap visit prevents the expensive one.
What Affects Fireplace Services Pricing in Hialeah
The same service can land at different points on the range depending on your home. Here’s what moves the number most.
- Flue height and roof access. A taller flue means more liner material and more time. Roof pitch and clearance at the top add labor. A chimney that’s straightforward to reach sits at the lower end of the range.
- Flue shape and condition. Square, rectangular, offset, and irregular flues are common in older South Florida homes. A flexible DuraFlex system handles those transitions where a rigid liner can’t. A flue that’s pitted or spalling may need HeatShield resurfacing, which is a separate line item.
- How often the fireplace is used. A fireplace burned regularly builds creosote faster, and heavy deposits take longer to sweep. A wood-burning fireplace used often needs attention more frequently than one that mostly sits idle.
- Whether the dryer vent is included. Combining a chimney sweep with a dryer vent cleaning in one visit is efficient. Both systems carry fire risk, and clearing both in a single appointment saves you a second contractor call.
- Type of fireplace. A masonry wood-burning fireplace, a factory-built unit, and a gas insert each need different handling. Gas units need the venting checked for proper draft, and the components differ from a wood-burning flue.
- Repairs already needed. A clean sweep on a sound chimney is simple. A sweep that uncovers a cracked crown, a rusted damper, or a failing flue adds repair cost on top of the cleaning.
If your home is anywhere in Hialeah, those variables are the ones we work through on the estimate. No two flues are the same, and we price the job we actually see.
How to Save on Fireplace Services
You don’t need to hunt for the cheapest bid to keep costs reasonable. The smarter move is to spend a little now and avoid a large repair later.
- Get the sweep and inspection done before problems grow. An inspection that catches a small flue crack costs a fraction of a liner replacement. Creosote that sits on the flue wall is what turns a small issue into a big one.
- Combine the chimney sweep and dryer vent cleaning in one visit. Both are fire hazards, and clearing both on the same appointment is more efficient than booking two separate visits.
- Ask about HeatShield resurfacing before you assume you need a full liner. If your flue is sound enough to rehabilitate, resurfacing can extend its life at a lower cost than tearing it out and lining it. This is where a specialist who can resurface stands apart from a sweep who can only clean or replace.
- Get the estimate in writing and compare line items, not just totals. A low total often means generic materials. Trade-grade parts specified by certified chimney contractors cost more up front and hold up longer.
- Don’t skip the dryer vent. It’s the least expensive service on the list and one of the highest fire risks. Clogged dryer vents are a leading cause of home fires, and clearing them is a simple appointment.
Estimates are free, so there’s no cost to finding out where your fireplace and vent systems actually stand. Call (855) 918-2061 to book one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why the Materials Matter More Than the Bid
Fireplace and venting work is one place where the cheapest quote usually shows its cost later. A generic flex liner from a hardware-store bin may fit, but it may not meet the venting standard your appliance or your home was built around. We specify the same professional-grade brands certified chimney contractors use nationwide: DuraFlex for flexible liner retrofits, HeatShield for flue resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for the components that complete a job.
That matters for two reasons. First, a properly sized liner from a recognized system vents the way it’s supposed to, which protects the appliance and the home. Second, the right termination on a dryer vent, sourced from Famco, avoids the improvised vent-hood setups that can void an appliance warranty or create backdraft. Our technicians have up to 12 years of experience, and they know the difference between a cosmetic patch and a repair that actually holds.
We’re a chimney and venting specialist, not a multi-trade contractor dividing attention across unrelated systems. That single focus is why we can tell you honestly whether your flue needs a sweep, resurfacing, or a full liner. When you’re ready for a straight answer, the team at Chimney Sweep Hialeah can walk your flue and give you a number you can plan around.
What Happens When You Call
You tell us what’s going on: smoke backing into the room, a fireplace you haven’t had swept in years, a dryer that takes two cycles to dry a load. We book a visit and come look at the actual systems, not just one of them. From there we give you a written estimate that separates the cleaning from any repair work, so you can see exactly what each line costs.
Because we handle chimney sweeping, dryer vent cleaning, and chimney repair, you’re not coordinating three contractors. One specialist, one visit if the work allows it, and a clear number before anything starts. If a repair is needed, we quote it in trade-grade materials and explain why it’s needed. The price is set per job by the written estimate, and the estimate costs you nothing.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Hialeah?
A standard chimney sweep in Hialeah typically costs $190 to $320, and a sweep with a video inspection usually runs $260 to $420. The final price depends on flue height, how much creosote has built up, and roof access. Call (855) 918-2061 for an exact quote; estimates are free.
Is it cheaper to resurface my flue or replace the liner?
HeatShield flue resurfacing, at $1,600 to $2,900, is generally cheaper than a full DuraFlex liner installation at $2,600 to $4,200. Resurfacing only makes sense if the flue is structurally sound enough to rehabilitate. We’ll tell you honestly which path your flue needs after we inspect it. Call (855) 918-2061 to book a free estimate.
How much does dryer vent cleaning cost in Hialeah?
Dryer vent cleaning in Hialeah typically costs $150 to $240. It’s the least expensive service on our list and one of the highest fire risks to address, so it’s worth pairing with a chimney sweep in the same visit. Call (855) 918-2061 for a quote; estimates are free.
Can you come the same day?
Same-day service is often possible depending on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 918-2061 to find the soonest available visit.
How much does a fireplace tune-up cost in Hialeah?
A fireplace tune-up in Hialeah typically costs $220 to $400. That covers firebox cleaning, a damper check, flue inspection, and a look at gaskets and seals. It’s a lower-cost way to catch a problem before it becomes a liner replacement. Call (855) 918-2061 for an exact quote; estimates are free.
Fees and How Pricing Works
We keep the pricing simple and up front. The estimate is free, and the price is set per job by the written estimate you receive. We don’t hide fees in the fine print or surprise you with add-ons after the work starts. You’ll see the cleaning and any repair work quoted as separate line items so you can decide what to do now and what can wait.
For fireplace and venting work specifically, that clarity matters. A sweep is a small, predictable cost. Repair and installation are larger, and they depend on what we find in your flue. We’d rather show you the number and let you plan than guess and adjust the bill later.
About Chimney Sweep Hialeah
We’re a chimney and venting specialist with three service lines: chimney sweeping, dryer vent cleaning, and chimney repair. Every repair and installation uses professional-trade brands, and our technicians have up to 12 years of experience. We don’t stray into unrelated trades. Fireplace and venting systems are what we know, and that’s what we quote.
Whether you need a routine sweep, a dryer vent cleared, or a flue resurfaced with HeatShield, the goal is the same: the right repair done correctly the first time, in the right materials for the job. Call (855) 918-2061 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Hialeah market as of 2026. Chimney Sweep Hialeah offers free estimates – call (855) 918-2061.
Written by the team at Chimney Sweep Hialeah.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Tim Mercer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Jamal Robinson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Jason Hoffman